Brown LH105 Resin Modeling Adhesives Epoxy Resin Materials CNC
Method of use
1. Respectively take agent 1 A and 1 B mix and stir to mix well.1
2. AB coating on the bonding agent mixture, and give us stick light
3. A glue adhesive items to shift of the banned or move in at least
10 minutes, otherwise it will seriously affect the bonding effect.
4. A glue adhesive items should be at least 4 hours before they can
normal use, otherwise the curing effect and adhesive life would be
5. Low temperature curing speed will slow down.
6. the appropriate surface treatment: then body surface of grease
or oil to clear or grinding, remove foreign bodies to strengthen
the bonding effect.
Matters needing attention
1. A, B two agent shall be stored in shady and cool place, two
doses not piled up at the same time.
2. A, B two agent such as A large number of mix, causes rapid
solidification of danger, should be especially careful, according
to the usage.
3. After use, such as skin touch/consignment agent, the application
of soap to clean.
4. Coated tools or containers are mixed, to shorten the service
Note: the product packaging in each group 2 kg, each box 10, will
be A and B glue can be used according to the ratio of 1:1 and stir
|Description||epoxy resin||curing agent|| |
|mixing ration||1||1|| |
|mixed time:500g,25°(min)|| || ||30|
|curing time before machining(20-25mm) (hours)|| || ||60minutes|
|Hardness(Shore D):|| || ||70-80|
|Temperature Resistance(°C):|| || ||100-150|
|Compressive Strength(N/mm²):|| || |
|Flexural Strength(N/mm²):|| || |
easily shaped and machined,fine surface structure
yacht model,benchmark model, system and sand-cast model, rapid